qLearnify – Learn Anything You Need

Main Menu
Menu
0
0
Subtotal: 0৳ 

No products in the cart.

No products in the cart.

Continue Shopping
Main Menu
0
0
Subtotal: 0৳ 

No products in the cart.

No products in the cart.

Continue Shopping
Menu
Course Content
Instruction & Course Materials
0/2
Download and Install CSI SAFE v16
Download Course Materials
Basic Introduction
0/3
Basic Introduction to Sub-Soil Investigation Report
51:34
Basic Introduction to Sub-Soil Investigation Report | Part-2
26:55
Basic Concept of Soil Subgrade Modulus with Excel calculation
10:07
Define Properties in CSI SAFE 2016
0/8
New Model Initialization
09:01
Define Materials Properties
07:21
Define Slab Properties
03:15
Define or Modify Reinforcing Bar Size
02:43
Define Soil Subgrade Properties
00:00
Define Load Patterns
03:47
Define Load combination as per BNBC
17:12
Basic discussion on mass sources
06:13
Isolated Footing Analysis & Design
0/9
Draw single footing for different situation
11:31
Assign soil subgrade modules on footing
01:25
How to assign load on footing form Etabs results
15:45
Analysis & check for settlement, soil pressure and punching shear
26:36
Re-shape model for failure of footing
15:14
Draw Design Strip and Re-analysis
08:59
Strip Based Design Method
14:51
Finite Element Based Design Method
05:41
QNA about this Lesson
04:32
Strap Footing Analysis & Design
0/8
Introduction to Strap Footing
05:37
Define Beam Section for Strap Footing
04:01
Draw Single Footing Before Analysis
04:13
Define Bearing Capacity and Load on footing
04:08
Analysis Single Footing
04:43
Draw Beam and Analysis Strap Footing
12:58
Design Strap Footing
11:34
Discussion on Strap Footing
04:07
Combined Footing Analysis & Design
0/8
Draw Combined Footing
02:16
Assign Bearing Capacity of Soil (Subgrade Modulus)
00:50
Analysis Combined Footing
02:26
Modify and Re-Analysis Model
00:59
Check Model for Settlement, Punching Shear
00:48
Re-Modify and Check Model
01:37
Draw Design Strip
02:55
Design Combined Footing
10:22
Continuous or Strip Footing Design
0/4
Model And Load On Continuous Footing
05:31
Analysis and check Strip Footing
04:32
Modify and Re-Analysis footing
19:52
Design Continuous or Strip Foundation
18:50
Rafts or Mat Footing Design
0/13
New Model Initialization for Mat Footing
07:30
Define Materials Properties
05:04
Define Mat Foundation Properties
01:26
Define Soil Sub-grade Modulus Properties
12:18
Define Load Patterns And Load Combination
04:47
Modify Coordinate or Grid System
06:09
Draw Mat and Column for Mat Foundation
04:36
Assign Bearing Capacity and load on Mat
04:26
Analysis & check Mat for settlement, soil pressure and punching shear
04:01
Uplift Check for Mat Foundation
11:15
Draw Design Strip and Re-analysis Mat
05:07
Design Combined Mat Foundation
11:58
Basic QNA about Mat Foundation
14:18
Pile Cap Design
0/15
Introduction to Pile Cap
10:57
Basic Concept of Pile and Pile Arrangement
09:15
Selection of Piles as per Capacity from Soil Report
12:27
Calculate Number of Pile and Size of Pile Cap
17:15
Define Materials Properties
05:21
Define Pile, Pile Cap, Column Properties
01:49
Define Point Pile Spring Properties
04:33
Define Load Patterns And Load Combination
01:29
Draw Pile Cap & Piles
05:20
Assign Point Spring Properties and Column
03:14
Assign Load Pile Cap Column
03:57
Analysis Pile Cap for Punching Shear & Capacity
21:22
Define Pile Cap
22:15
Pile Cap Design Under Lift Core Wall – Part 1
37:47
Pile Cap Design Under Lift Core Wall – Part 2
54:18
Manual Pile Design
0/9
Piles and its classification
11:01
Pile Layout Patterns
08:30
Minimum Criteria of Piles
09:40
Pile Load Capacity
03:23
Basic Concept of Pile Cap and Thickness
16:55
Manual Pile Design
03:58
Load Calculation for pile design
06:54
Pile Length Calculation
03:45
Pile Reinforcement Calculation
03:32
Apply for the Course Certificate
0/1
Follow Instructions and Apply for Certificate
CSI SAFE v16 Foundation Design Course
Previous
Next
0% Complete